Basic Tool Box Essentials

Many jobs are made a lot simpler by either owning, or renting the right tools to carry out the job. It is important whether you are a professional in the building industry, or just keen on DIY to have the right tools. Being well prepared is an important factor to help make the job run smoothly, and efficiently.

Below is a list of essential tools you will need to keep in your toolbox, to be able to carry out many everyday tasks.

UPVC FASCIAS AND GUTTERS:

• MEASURING TAPE- to provide accurate measurements for length, and depth of fascia, gutters, and cuts, that you will need to perform.
• CARPENTER’S PENCIL- to make marking points for cuts that need to be made.
• FINE TOOTH SAW- to perform accurate, and smooth cuts to fascias, and gutters.
• BEVEL- to provide different cutting angles that may need to be performed.
• SPIRIT LEVEL- to make sure gutter has correct decline, and downpipe is level.
• DRILL/CORDLESS DRILL- to fix fascia brackets / downpipe clips into place, and also to drill holes for fixing points.
• CLAW HAMMER- to remove nails, and loose debris that could be an obstruction, also can be used to hammer poly pins into fascia.

FIBRE GLASS ROOFING:

• SAW-to cut boards, and trims to correct size.
• MEASURING TAPE - to provide accurate measurements for boards, and trims.
• DRILL-to screw boards down.
• HAMMER- to nail trims into place.
• CATALYST DISPENSER - to provide accurate measurements of catalyst, when mixing resin, and top coat.
• STANLEY BLADE - to cut fiberglass matting to the correct length.
• CARPENTERS PENCIL- to make marking points for cuts that need to be made.

As you can see from the above many of the tools are duplicated because they are of a general purpose nature. These tools are not just essential for the above, but are also necessary for many other building repairs. For further information on our tool range, please do not hesitate to contact Speedy Plastics and Resins on local number (0844) 8586670, and our team will be delighted to help.